What is sheet metal gauge?
Sheet metal gauge (or gage) is a number that describes sheet thickness, used mainly in the US and Canada. A higher gauge means thinner metal, and the same gauge is a different thickness for each material: 11 gauge steel is 3.04 mm (0.1196 in), while 11 gauge aluminium is 2.30 mm (0.0907 in).
.avif)
What does gauge mean in fabrication?
Gauge numbers started as weight and wire-drawing standards, not thickness measurements, so they don't follow a formula. Each material has its own table:
- steel: Manufacturers' Standard Gauge
- galvanised steel: its own gauge, slightly thicker than plain steel at the same number
- stainless steel: its own gauge table
- aluminium: Brown & Sharpe, the American Wire Gauge
In Australia, New Zealand, the UK and Europe, suppliers sell sheet by its thickness in millimetres. Gauge still turns up there on US drawings, imported specifications and older equipment.
How is gauge used?
Common gauges, from the Tempus Tools gauge chart:
- 10 ga: steel 3.42 mm (0.1345 in), stainless 3.57 mm (0.1406 in), aluminium 2.59 mm (0.1019 in)
- 11 ga: steel 3.04 mm (0.1196 in), stainless 3.17 mm (0.1250 in), aluminium 2.30 mm (0.0907 in)
- 14 ga: steel 1.90 mm (0.0747 in), stainless 1.98 mm (0.0781 in), aluminium 1.63 mm (0.0641 in)
- 16 ga: steel 1.52 mm (0.0598 in), stainless 1.59 mm (0.0625 in), aluminium 1.29 mm (0.0508 in)
- 18 ga: steel 1.21 mm (0.0478 in), stainless 1.27 mm (0.0500 in), aluminium 1.02 mm (0.0403 in)
Thicker material, from 3/16 in or 1/4 in up depending on the supplier, is called plate and is described by its thickness in fractions or decimals of an inch.
Why does gauge matter?
Mixing up gauge tables is an easy way to quote the wrong material. A drawing that says 11 gauge aluminium means 2.30 mm sheet. Quote it from the steel table and the material is a third thicker than specified.
Gauge sizes also don't line up with metric sheet. 11 gauge steel is 3.04 mm, close to 3 mm sheet but not the same, and 16 gauge at 1.52 mm sits between 1.5 mm and 1.6 mm. When a customer specifies gauge, confirm whether a metric equivalent is acceptable before ordering material.
Gauge, tolerance and actual thickness
A gauge number is nominal. Mill tolerances mean supplied sheet measures thinner or thicker than the table, and that variation shows up at the press brake as changes in bend angle and flat pattern size. Where thickness is critical, measure the sheet, and specify a thickness with a tolerance instead of a gauge.
Gauge and quoting
Material cost, cut time, bending force and weight all follow the actual thickness, so build every quote on millimetres or decimal inches, whatever the customer wrote. Convert the gauge with the right material's table and state the thickness you've priced on the quote, so any mismatch shows up before the material is ordered.
Convert any gauge to mm and inches
Our sheet metal gauge chart lists gauge thicknesses for steel, galvanised steel, stainless steel and aluminium in millimetres and inches.

FAQs
Is a higher gauge thicker or thinner?
Thinner. Gauge numbers run backwards: 10 gauge steel is 3.42 mm (0.1345 in) and 20 gauge steel is 0.91 mm (0.0359 in). The number is a position in a table, not a measurement, so it doesn't convert to thickness with a formula.
Is 11 gauge the same thickness for steel and aluminium?
No. 11 gauge steel is 3.04 mm (0.1196 in), 11 gauge stainless is 3.17 mm (0.1250 in) and 11 gauge aluminium is 2.30 mm (0.0907 in). Each material has its own gauge table, so always check which material a drawing means.
What thickness is 16 gauge steel?
16 gauge steel is 1.52 mm (0.0598 in). At the same gauge, galvanised steel is 1.61 mm (0.0635 in), stainless 1.59 mm (0.0625 in) and aluminium 1.29 mm (0.0508 in). The closest metric sheet is 1.5 mm or 1.6 mm.
Is sheet metal gauge used in Australia?
Rarely. Australian, New Zealand, UK and European suppliers sell sheet by thickness in millimetres. Gauge turns up mainly on US drawings and imported specifications, so convert it to millimetres with the right material's table before quoting or ordering.