What is a press brake?
A press brake (also called a brake press or bending machine) bends sheet metal by pressing it between a punch and a V-shaped die. It's the standard machine for folding laser-cut blanks into brackets, channels, boxes and enclosures.
.avif)
What does press brake mean in fabrication?
A press brake has a long fixed bed holding the lower tool, the die, and a moving ram holding the upper tool, the punch. The sheet sits on the die against a back gauge, the ram comes down, and the punch pushes the sheet into the V to form the bend. In Australia and the UK this work is called folding; in the US, bending.
Press brakes are described by two numbers:
- tonnage: the maximum force the ram can apply
- bed length: the longest bend the machine can make
Most modern machines are CNC controlled, with a programmable back gauge that positions the sheet for each bend. They're hydraulic, electric (servo) or a hybrid of the two.
How is a press brake used?
Most press brake work is air bending. The punch pushes the sheet partway into the die, and the depth of the stroke sets the angle. The die opening sets the inside radius, so one set of tools makes many angles.
A job runs like this:
- Load the punch and die, adding tool segments to cover the length of the bend.
- Set the back gauge and bend a first part to check the angle and dimensions.
- Bend the batch, flipping and repositioning each part between bends.
Setup takes longer when a part needs several tool sets, or a bend sequence that keeps earlier flanges clear of the tools.
Why does a press brake matter?
For most fabrication shops, the press brake is the step after the laser, and often the bottleneck. Cutting is automated; folding is operator time. Every part is loaded, positioned and handled by hand, so folding time grows with the number of bends and the size of the part.
The press brake also sets what's possible. A bend longer than the bed, thicker than the tonnage allows, or with a flange too short for the die can't be made, so check before the quote goes out. Bent parts also depend on an accurate flat pattern, which comes down to the K-factor and bend radius used to unfold them.
Press brake tonnage
Tonnage rises with the square of the thickness. The long-standing rule of thumb for air bending mild steel is in imperial units:
- tons per foot of bend = 575 x thickness² ÷ die opening, with thickness and die opening in inches
For 1/8 in (3.2 mm) mild steel over a 1 in (25 mm) die, that's 9 tons per foot (27 tonnes per metre). A 10 ft bend needs 90 tons, and a 3 m bend 80 tonnes. Double the thickness and the force goes up four times. Stainless steel needs more force in proportion to its higher tensile strength, and a narrower die needs more force but forms a tighter radius.
Press brakes and quoting
Folding cost comes from time: setup, then loading, positioning and pressing for every bend, with a second operator for large or heavy parts. In Tempus Tools, folding is priced from the longest fold and the number of folds. The longest fold sets how many tool sets are loaded and the setup time, the number of folds sets the press time, and the part's area and weight set the handling time and whether extra people are needed. Setup can be charged per line item or shared across all parts of the same material and thickness.
Further reading: Sheet metal bending: a practical guide for fabrication shops
Price folding from the part itself
Tempus Tools calculates tool sets, setup, press time and extra handlers from each part's longest fold, number of folds, area and weight, and adds folding to the same quote as the cutting.

FAQs
What is the difference between a press brake and a brake press?
There's no difference. They're two names for the same machine, which bends sheet metal by pressing it between a punch and a V-shaped die. Shops also call it a brake or a bending machine, and in Australia and the UK the work is called folding.
How much tonnage do I need on a press brake?
Work from your thickest, longest bend. For air bending mild steel, the rule of thumb is 575 x thickness² ÷ die opening (in inches) tons per foot of bend. 1/8 in steel over a 1 in die needs 9 tons per foot, so 90 tons for a 10 ft bend. Stainless steel needs more.
What is air bending?
Air bending is the most common press brake method. The punch pushes the sheet partway into the V-die without pressing it to the bottom, and the stroke depth sets the angle. One set of tools makes many angles, and the die opening sets the inside radius.
What determines the cost of bending a part?
Setup and handling, more than the bend itself. Setup depends on how many tool sets the longest fold needs. Each bend then adds loading, positioning and press time, and large or heavy parts can need a second operator.